![]() ![]() Both battery levels are displayed at the top above the main power in a larger font with current mode next to it. The display screen on the Drag 3 is clear and detailed in the current setup running on the device. There is also an automatic SUPER mode when adding a low coil resistance of 0.1Ω-0.3Ω which will increase to a faster firing speed. To switch between these two main modes, simply fast click the fire button 3 times. RBA mode is the usual user-defined wattage to set your own power. In SMART mode, it will automatically set the best wattage to the best resistance of the coil inserted. The Drag 3 uses Voopoo’s Gene Fan 2 Chip and runs two main modes, SMART and RBA. On the bottom of the device is a slide-out battery door and at the top of the Drag 3 on one side is the 510 port. Situated under the buttons is a Type-C charge/update port. The 1.08-inch colour TFT display screen is situated on the front side of the Drag 3, below the main fire/power button and above the +/up and -/down buttons. You can also purchase a variation of this later Drag 3 Kit with an Eagle design on the leather. There is some squidgy padding under the PU Leather for comfort. The PU Leather design wraps around the sides and back of the device with an etched in ‘Drag 3’ on one side and ‘Voopoo’ on the other. Without batteries inserted, it weighs around 118g. Without the TPP-X pod or a tank attached, it measures 8.6cms length, 5.2cms width and a depth of 2.2cms. ![]() It is built with Zinc Alloy and PU Leather design. The device runs on 2 x 18650 Batteries and powers from 5W-177W.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |